UCT-303-B

Integrated Circulation Pumps That Save You Time and Money

The UltraCirc™ design incorporates a ball valve on the inlet side of the pump, a spring check valve on the discharge side of the pump and ½” sweat union connections. The compact design saves space, the cost associated with purchasing the additional fittings and is also a huge labor-saving product for the contractor/plumber. The UltraCirc™ feature is available on the SM-303 and SMT-303 series pumps. The SM-909 series pumps are available for larger plumbing circuits.

Features:

Integrated Check Valve
Integrated Ball Valve
24 hour built-in timer to turn system off in periods of non-use
Adjustable Thermostat (Optional)
Quick Release Screw Ring
Low flow provides minimal flow velocities thereby reducing the effect of pipe erosion and noise caused by vibration.
Rated for temperatures to 230 degree F and line pressures to 150 PSI
Requires only 33 watts of power

Technical Data:

Model	Volts	Cycle	Phase	Watts	Amps	Maximum. Pressure	Maximum Temperature	Weight (lbs.)
UCT-303-B	115	60	1	33	0.30	150 PSI	230F	2.5
UCT-303-B	230	60	1	33	0.15	150 PSI	230F	2.5
UCT-353-B	230	50	1	28	0.13	150 PSI	230F	2.5

Performance Curve:

Material of Wetted Parts:

Brass Housing
316 Stainless Steel Rotor and Separating Wall
Noryl Impeller
Ceramic Bearing Ball
Carbon Graphite Bearing Cap
EPDM O-Ring

Ordering Information:

Standard pump configuration includes brass inline housing,
concealed capacitor, and internal terminal strip w/ wiring diagram for hard wiring.

Options Available:

6 ft. line cord with plug (115V models Only)
230V, 60Hz, 50Hz, and 24VAC motors
Adjustable Thermostat (95-158F)